Wood Flame usage I produced the "escape fire" fire wood as a white powder easily dissolved in water, are environmentally friendly halogen-free and heavy metals and other prohibited ingredients, flame, smoke suppression, anti-corrosion and anti-termite properties. Widely used in fire retardant treated wood fire doors, composite wood and other products. Special needs statement is that my company produced wood flame retardant does not cause any corrosion of tanks and other equipment. The company's 8124 production of wood-based flame retardant is also a good wood preservative, can play a flame retardant, corrosion of double effect. After using the "escape fire" 8124 type wood flame no longer can be achieved using a wood preservative wood preservative requirements. The configuration of the treatment liquid: "fire escape" flame retardant and water ratio is generally 1:4-1:6 (weight ratio), the more difficult the higher recommended retardant wood fire retardant treatment solution concentration. Fire-retardant treated wood: the general vacuum pressure treatment, usually 30-60 minutes before the time of the vacuum, most broadleaf forests (such as birch, basswood, elm) pressurization time was 30-45 minutes, the pressure is 1.2 trillion afraid. Korean pine infusion time of 2-3 hours, the pressure of 1.4 MPa, impregnation depth 8-10 mm. After each treatment treatment solution can be recycled, the concentration of the treatment solution is not due to changes in timber processing times and change. Retardant wood production process - high-pressure vacuum impregnation Description: 1 kg into the right amount of water in a container, add flame retardants, stirring to dissolve into a flame retardant transparent solution; 2 high-pressure impregnation of wood into the tank. , cover cap; 3 is evacuated to 600 to 650 mm Hg, for 30 to 60 minutes; 4 opens the valve connected to the storage tank retardants, flame retardant depend vacuum pressure introduced into the dip tank, a flame retardant When dipping tank filled with the vacuum released, close the vacuum valve; 5 slowly pressurized to 1.2 ~ 1.4MPa, and maintained for 2 ~ 4 hours; 6 retardant absorption: flame dry / dry wood is 10 to 15%. 4 to 6 taken in advance with the specifications of timber labeling, weighing, the sample was dispersed into the dipping tank; after the immersion period, remove the sample, weighed to calculate the absorption retardant. If the flame inadequate absorption, prolonged soaking time. 7 the pressure was released, discharging agent, a flame retardant closed pressurized tank valve and the valve is connected; 8 evacuated to 600 to 650 mm Hg for 10 to 15 minutes; 9 release the vacuum, remove the timber; 10. dried to the desired moisture content. The company "fire escape" wood flame retardant has been tested by the National Fire Protection Building Materials Quality Supervision and Inspection Center, users can be assured. Welcome to inquire